We are thrilled to have you as our customer.  Haywire is not your typical a typical internet service provider.  We do things a little different than the big internet service providers.  Below is an overview of your internet service and some answers to common questions to get your better acquainted with Haywire.

Welcome to Haywire at Federal Hill

The Basic Stuff
Billing

The fee for Haywire internet is billed through through the leasing office. You will not receive an individual bill from Haywire.

Speeds

Our blazing fast fiber-optic internet offers plans up to gigabit class speeds (Wi-Fi speeds may vary). For detailed information about speeds, see Speed Tests.

Current service plans and pricing can be viewed at Federal Hill Apartments Service Plans.

Cancelling

When you know you move out date, simply fill out the cancellation form to schedule your service termination.

Connecting to the Wi-Fi
Network Name And Password

Haywire centrally manages the Wi-Fi in your building.  Each apartment has its own Wi-Fi access point and wireless network.  When Haywire activates your account, they will text you your Wi-Fi network name and password.  Additionally,  your Wi-Fi network name and password can be found in the customer portal.

Changing The Wi-Fi Settings

Haywire Wi-Fi access points are centrally managed, so there is not a customer login to manage the settings, such as the Wi-Fi name and password.  If you would like the Wi-Fi network name or password changed, just let us know the new name and password (must be at least 8 characters) and we will make that change. If you are more of a do-it-yourself person,  you are welcome to use your own Wi-Fi enabled router (or access point) and plug it into the ethernet ports on the bottom of Haywire access point (or other ethernet port in your apartment). If you decide to go that route, just let us know and we will disable our Wi-Fi to prevent any interference issues.

The Difference Between Your Regular And "_2.4" Network

By default, Haywire creates two wireless networks (SSIDs) in each apartment; “Haywire 1234”, and
“Haywire 1234_2.4” where 1234 is your apartment number.  Both wireless networks come from your Wi-Fi access point in your apartment and will get you to the internet.  The difference between the two is the radio frequencies they use.

“Haywire 1234”  has both 2.4ghz and 5ghz frequencies available.  Your device will select which frequency to use.

“Haywire 1234_2.4”  has 2.4ghz only.

Which Network Should I Use

As your “Haywire 1234” network has both radio bands, it should be used by default.

When to use the _2.4 Network

There are two occasions to use the “Haywire 1234_2.4” network.

Some devices like older smart TVs and some IOT devices will work on a 2.4ghz only network.  If your device can only see the 2.4ghz network or can’t connect to the other network, give the “Haywire 1234_2.4” network a try.

If you are experiencing lag or buffering on the “Haywire 1234” network, try the “Haywire 1234_2.4” network. Sometimes devices will choose 5ghz even when the 2.4ghz radio band would work better.  2.4ghz has more range and works better through walls, but has less potential bandwidth.  Using the “Haywire 1234_2.4” network will force your device to use the 2.4ghz radio band.

Equipment in Your Apartment
WiFi Access Point

This is your Wi-Fi access point that allows your wireless devices to connect to the internet.  It is attached to your wall and cannot be removed.  On the bottom of the access point are 4 ethernet ports for connecting any devices using an ethernet cable.

Router

This is your Haywire fiber router.  It is located in an enclosure in your apartment closet.

Switch

This device connects the ethernet ports on the walls and Access Point to the router.

Networking Enclosure

 

Your router and switch are both located in this enclosure, located in a bedroom closet.

How To Restart Your Equipment
How to Restart Your Equipment

As an initial step to resolve a service outage, a restart of your Haywire Internet equipment is recommended. The steps below should be followed to restart all of the Internet equipment in your Apartment.

  1. Locate your equipment enclosure. It is a white box , usually in a closet.
  2. Open the box.
  3. Unplug the power cord that is plugged in to the electrical outlet .(circled in red in the picture)
  4. Wait 15 seconds and then plug it back in
  5. Wait 3 minutes for the Haywire equipment to start.