Welcome to Haywire at Lockerbie Lofts

Here are a few key points to remember:

  • Billing: The fee for Haywire internet is billed through through the leasing office. You will not receive an individual bill from Haywire.
  • Speeds: Our blazing fast fiber-optic internet offers gigabit class speeds (WiFi speeds may vary). For detailed information about speeds, see Speed Tests.
  • Support: For any inquiries, technical assistance, or general support, please visit our support page reach out to our dedicated support team via text or phone at (317) 747-269

Connecting to the WiFi

Network Name and Password

Haywire centrally manages the WiFi in your building.  Each apartment has its own WiFi access point and wireless network.  When Haywire activates your account, they will text you your Wifi network name and password.  Additionally,  your WiFi network name and password can be found in the customer portal: https://unms.haywirenetworks.com/crm/

Changing the WiFi Settings

Haywire WiFi access points are centrally managed, so there is not a customer login to manage the settings, such as the WiFi name and password.  If you would like the WiFi network name or password changed, just let us know the new name and password (must be at least 8 characters) and we will make that change. If you are more of a do-it-yourself person,  you are welcome to use your own WiFi enabled router (or access point) and plug it into the ethernet ports on the bottom of Haywire access point (or other ethernet port in your apartment). If you decide to go that route, just let us know and we will disable our WiFi to prevent any interference issues.

The Difference Between Your Regular and "_2.4" Network

By default, Haywire creates two wireless networks (SSIDs) in each apartment; “Haywire 1234”, and
“Haywire 1234_2.4” where 1234 is your apartment number.  Both wireless networks come from your WiFi access point in your apartment and will get you to the internet.  The difference between the two is the radio frequencies they use.

“Haywire 1234”  has both 2.4ghz and 5ghz frequencies available.  Your device will select which frequency to use.

“Haywire 1234_2.4”  has 2.4ghz only.

Which Network Should I Use

As your “Haywire 1234” network has both radio frequencies, it should be used by default.

When to use the _2.4 Network

There are two occasions to use the “Haywire 1234_2.4” network.

Some devices like older smart TVs and some IOT devices will work on a 2.4ghz only network.  If your device can only see the 2.4ghz network or can’t connect to the other network, give the “Haywire 1234_2.4” network a try.

If you are experiencing lag or buffering on the “Haywire 1234” network, try the “Haywire 1234_2.4” network. Sometimes devices will choose 5ghz even when the 2.4ghz radio band would work better.  2.4ghz has more range and works better through walls, but has less potential bandwidth.  Using the “Haywire 1234_2.4” network will force your device to use the 2.4ghz radio band.

 

The Following Equipment Is In Your Apartment

WiFi Access Point

This is your Wi-Fi access point that allows your wireless devices to connect to the internet.  It is attached to your wall and cannot be removed.  On the bottom of the access point are 4 ethernet ports for connecting any devices using an ethernet cable.

Router

This is your Haywire fiber router.  It is located in an enclosure in your apartment closet

Switch

This device connects the ethernet ports on the walls and Access Point to the router.

Networking Enclosure

Your router and switch are both located in this enclosure, located in a bedroom closet.